Tropical Fish Forum

Tropical Fish Keeping => General Fishkeeping Chat => Topic started by: Sue on December 29, 2015, 03:04:59 PM

Title: Help wanted - nitrate measurements
Post by: Sue on December 29, 2015, 03:04:59 PM
On another forum, nitrate levels are being discussed. One member, a Canadian, says that the max allowed nitrate in drinking water is 10ppm, and that the scale used by water companies is different from our home test kits. He says you need to multiply water company nitrate by 4.43 to get it to the same as our test kits.
[Nitrate is NO3; it contains 1 atom of nitrogen and 3 atoms of oxygen. The American water companies measure only the weight of the nitrogen part of nitrate while the home testers measure the weight of nitrogen AND oxygen, ie the weight of the whole nitrate]

In the UK, the DWI (drinking water inspectorate) says the max permitted level is 50ppm, which is a lot higher than the American max, and sounds suspiciously like their 10ppm multiplied by that 4.43. That is, it sounds as though UK water companies use the same units as our home testers.

My tapwater tests at lower than 5ppm with my API tester. My water company says that out of 8 tests, the minimum was 1.3, the maximum 3.6 and the mean 2.2. Multiplying 2.2 by 4.43 gives 9.75. Given the inaccuracies of home testers, my 'under 5' could in fact be 9.75.




In order to prove which units UK water companies use, I need someone who has tapwater with nitrate near the upper limit to test their nitrate and look up what their water company says it is. With higher numbers, multiplying by 4.43 would make a huge difference.
For example, if the water company was using the American units, 30ppm on a water company website would give a reading of 132ppm with a home tester and it should be easy to tell the difference between 30 and 130 even allowing for home kits being inaccurate. But if the water company was using the same units as the home tester, the results should be similar.



Anyone..........? ? ? ?
Title: Re: Help wanted - nitrate measurements
Post by: Extreme_One on December 29, 2015, 06:23:35 PM
I was about to go ahead and do this for you when I discovered that the Southern Water website isn't currently able to display water quality readings for my postcode.

I'll try and contact them tomorrow to inform them their website isn't working properly.

FWIW when I last looked they were saying that in my area Nitrate is at approx 40ppm (!) and that's what I was getting using the API liquid test.
Title: Re: Help wanted - nitrate measurements
Post by: Sue on December 29, 2015, 07:28:08 PM
Thanks, Simon, that's the kind of thing I'm looking for.
On the other site in the past, a couple of Americans have thrown their hands up in horror at our permitted nitrate being 50ppm. I'm becoming more convinced it's just the way the two countries measure it. 50ppm measured as Nitrate-NO3 is just a bit higher than 10ppm measured as Nitrate-N.


It is 5 years since my younger son worked for the water testing company so he's probably forgotten how they measured it. His PhD research was all theoretical/computational chemistry so he's probably forgotten all the hands-on stuff. He'll be up for New Year's Eve so I'll see if he does remember. Or knows where to look to find out.
Title: Re: Help wanted - nitrate measurements
Post by: Skittler on December 30, 2015, 11:57:10 AM
Hello Sue,

My 125L is a year old now, and I have done many, many nitrate tests with 3 different API liquid testers. Also, I have checked my tap water on several occasions.

Wessex Water:                 4 - 7, average 6.
My tap water tests:           5 or 10, always - which is what you might expect.
Tank tests:                       20 - 40, depending on fertilizers, w/c's etc.

All is good and healthy, and I have total confidence in the API liquid test kits.

                                            Skittler
Title: Re: Help wanted - nitrate measurements
Post by: Sue on December 30, 2015, 12:05:24 PM
Thank you Skittler, another piece of evidence for my theory  :)
Title: Re: Help wanted - nitrate measurements
Post by: Sue on January 02, 2016, 01:54:33 PM
I now have the answer.

Son #2 came to see us on New Year's Eve so I asked him. UK water testing companies measure nitrate as the whole thing not just the nitrogen part like American water testing companies.

In other words, in their water quality reports, UK water companies give nitrate measurements in the same units that our home testers use.

Title: Re: Help wanted - nitrate measurements
Post by: Extreme_One on January 02, 2016, 05:32:19 PM
Thanks for the update Sue.  Good to know.
Title: Re: Help wanted - nitrate measurements
Post by: jaypeecee on December 29, 2018, 02:08:03 PM
I realize that this is an old thread but I just wanted to say 'thank you' for raising the question and also getting an answer to it.

JPC